Skip to main content
    CIT Repair & Remodeling logoCIT Repair & Remodeling
    Call (754) 757-9696

    Shingle Roofing

    Asphalt shingle roof installation, replacement, and repair. A common, cost-effective roofing choice for South Florida homes when installed and flashed correctly.

    Call (754) 757-9696Request a Free Estimate
    Florida Certified Roofing ContractorWoman-owned

    What this service includes

    Asphalt shingle roofing is the most common roof covering on American homes, and for good reason. Shingles are practical, widely available, and straightforward to repair when a section is damaged. A shingle roof is built in layers: a deck, a water-resistant underlayment, metal flashing at the edges and penetrations, and the shingles themselves fastened on top. When each layer is installed correctly, the system sheds water reliably and holds up to ordinary weather for years.

    In Fort Lauderdale and across Broward County, shingles face a specific set of challenges. Ultraviolet exposure from months of direct sun slowly dries out the asphalt, making shingles brittle. Afternoon storms and hurricane-season winds lift edges and test every fastener, while humidity keeps the underside of the roof damp if ventilation is poor. Granule loss is normal over time, but when it accelerates, the shingles lose the protection that keeps them from baking in the sun. Proper installation, including correct nailing patterns and starter courses, is what separates a shingle roof that weathers South Florida from one that does not.

    Shingle roofing installed by a Florida Certified Roofing Contractor is built to Florida Building Code wind and water standards, which in Broward County are demanding. As a Polyglass certified contractor, CIT Repair & Remodeling uses manufacturer-approved underlayment and flashing materials that pair correctly with the shingle system. The business is woman-owned and owner-operated, so the licensed contractor is involved in the installation rather than handing it off to an unrelated crew.

    Whether you need a full shingle replacement, a section repaired after a storm, or a new shingle roof on an addition, the work starts with a free estimate and an inspection of the deck and existing materials. Broward County requires permits and inspections for shingle roof replacements, and a licensed contractor pulls those permits and schedules the required inspections as part of the job.

    Signs you may need this service

    • Shingles that are curling at the edges, cracking, or losing granules in large amounts.
    • Bald patches where the protective granules have worn away, leaving the asphalt exposed to the sun.
    • Shingles missing or lifted after a storm, especially along ridges, edges, and windward slopes.
    • Water stains on ceilings or in the attic after rain, pointing to a failed section of the shingle system.
    • A shingle roof that is several years old and has never been inspected, especially before selling or after a hard storm season.

    How this work is done

    This describes how shingle roofing generally proceeds in the trade, so you know what to expect.

    1. 1

      Inspection and estimate

      The deck, underlayment, flashing, and shingles are inspected to assess condition. A free estimate lays out whether a repair or a full replacement is the right call and which shingle fits the home.

    2. 2

      Permitting

      For a replacement, a licensed contractor pulls the required Broward County permit before work begins. The permit sets the wind and inspection requirements the installation must meet.

    3. 3

      Tear-off and deck prep

      Old shingles and underlayment are removed down to the deck for a full replacement. Damaged or rotted deck sections are replaced so the new shingles fasten to a solid surface.

    4. 4

      Underlayment, flashing, and starter course

      A water-resistant underlayment is laid, metal flashing is installed at edges and penetrations, and a starter course of shingles is set along the eaves. These layers do most of the waterproofing.

    5. 5

      Shingle installation

      Shingles are fastened in the correct nailing pattern and pattern offset to Florida Building Code wind standards. Ridges and hips are finished to seal the roof against wind-driven rain.

    6. 6

      Inspection and closeout

      Required permit inspections are passed, the site is cleared of old materials and nails, and the finished roof is reviewed with the homeowner.

    Why homeowners call CIT

    • Florida Certified Roofing Contractor

      This roofing work is performed by a Florida Certified Roofing Contractor, license verified active in 2026.

    • Woman-owned & owner-operated

      Owned and operated by Citlaly Torres, the licensed contractor on the project.

    Frequently asked questions

    Service areas

    We provide shingle roofing to homeowners in Fort Lauderdale, Oakland Park, and Broward County. Contact us to confirm we cover your address.

    Get a free estimate for shingle roofing

    Call to talk through your project, or request a free estimate. We serve Fort Lauderdale, Oakland Park, and Broward County.